EPSON printer with cartridge ink uses a micro voltage print head technology, through the voltage changes to the crystal vibration and then eject the ink, it is characterized by easy to achieve a high resolution, and with its unique ink technology, you can get Perfect photo print . Despite its print quality is first-class, however the cartridge is also more expensive! Many people want to be able to use ink to reduce the cost of printing, but there do not have so many people do it now.
Most users are afraid of improper operation may cause the printer to malfunction, or do not know how to operate. In fact, EPSON inkjet printer ink cartridges is convenient than other machines, because it is separated from the nozzle, so do not have to punch, you only need a few disposable syringes can complete the task.
How to make the Cartridge ink insert the black ink operation steps are as follows:
1 . Remove the Cartridge ink: Remove the black Cartridge ink when the light of the printer ink useless is on and use a disposable syringe to draw 7ml ~ 8ml of ink, put the ink hole up and keep it 45 degree when we inject the ink.
2 . Injection of ink: the disposable syringes in the ink slowly into the ink hole, ink injection action should be fast before and then slow down, repeat the operation several times until the completion. At the same time, through the plastic box to observation, the ink filled with the capacity of the cartridge 4/5 should be finished. It can not be too full, and then wipe out the ink around the ink hole;
3. Installation to the printer: when the cartridge ink into the bracket, the back must be close to the bracket, when the location is installed, the cartridge ink lock bar can be gently pushed in place. If you feel heavy, indicating the wrong position of the cartridge ink, at this time, you can release the lock bar, while the left hand with the left and right to move it up and down, while the right hand gently push the lock bar,
4. To clean the print head: Open "My Computer / Printer / Properties / Control", go to "Clean Print head", and after one or two cleaning, print a test page and you will be able to use it. If you want to add color ink, but slightly more cumbersome, the operation of the basic steps and similar: